Body Parts
Side (Outer Half) x2
Side (Inner Top) x2
Side (Inner Middle) x2
Side (Inner Bottom) x2
End (Outer Half) x2
End (Inner Half) x2
Middle x1
Roof (Detail) x1
Bottom x1
Body PartsSide (Outer Half) x2 Side (Inner Top) x2 Side (Inner Middle) x2 Side (Inner Bottom) x2 End (Outer Half) x2 End (Inner Half) x2 Middle x1 Roof (Detail) x1 Bottom x1 |
Chassis Parts Subframe x1  Side Rail x2  Buffer Beam x2  Buffer Half x4  Wheel x4  Axle x2  Bushing x4 Instructions for building the chassis can be found here. |
Detail Parts Seats (Cushion Type) x4  Detail Part Sprue x1 |
Side Panels
|
End Panels
|
End Steps
|
Roof Vents The base plate of the roof vent has a slight angle which fits flush to the roof line, orient this correctly before glueing in place. |
Running Boards Attach brackets either side of each axle box as shown, the locating bump on the underside of each board will locate it. 
|
