Body Parts
Side (Outer Half) x2
Side (Inner Half) x2
End (Outer Half) x2
End (Inner Half) x2
Bottom x1
Body PartsSide (Outer Half) x2 Side (Inner Half) x2 End (Outer Half) x2 End (Inner Half) x2 Bottom x1 |
Chassis Parts Subframe x1  Side Rail x2  Buffer Beam x2  Buffer Half x4  Wheel x4  Axle x2  Bushing x4 Instructions for building the chassis can be found here. |
Detail Parts Brake Parts |
3/4 Planks 3/4 planks always go to the bottom. |
Strap Detail Strap details always start from or taper towards the bottom. |
 Each side wall consists an outer and inner half. Glue the halves as shown here paying attention to correct orientation. |
 The top surfaces should be flush while the other three edges have equal gaps. Repeat this assembly for each of the four sides. |
 Once completed these gaps will interlock at the corners. This provides added strength through increased glue contact area. |
