Body Parts
Base Plate (Edged) x1
Plough Blade Half (Pair)
Blade Support Brace x2
Weight (Hollow) x1
Toolbox x1
Body PartsBase Plate (Edged) x1 Plough Blade Half (Pair) Blade Support Brace x2 Weight (Hollow) x1 Toolbox x1 |
Chassis Parts Subframe x1  Side Rail Sprue (2x Rails)  Wheel Sprue (4x Wheels)  Axle x2  Bearing x4 Instructions for building the chassis can be found here. |
Detail Parts Eye Rings Sprue (8x Halves) |
Blade Mounting The snow plough blade will naturally centre over the coupling. |
Blade Braces Suggested location of struts & toolbox/weight spacing. |
Assembling the Weight Glue each hook together, then attach to the corners. |
Adding Weight Additional weights can be added under the hollow false block. |
|